APM Terminals recruits 01 Oil Analysis Engineer

APM Terminals recruits 01 Oil Analysis Engineer

APM Terminals

Tangier, Morocco

Transports et logistique

Oil Analysis Engineer
MoroccoTangierLocal/International Container Manufacturing/EngineeringLast application date: 31/12/2021
At APMT we value the diversity of our talent and will always strive to recruit the best person for the job we value diversity in all its forms, including but not limited to: gender, age, nationality, race, sexual orientation, disability
We offer
Key responsibilitiesThe Oil Analysis Engineer’s responsibilities include, but are not limited to:• Performing laboratory analysis (oil testing) for Lubricant or Hydraulic oil• Providing technical support and training for oil testing to technicians in the APM Terminals locally (if required).• Managing laboratory data for all APM Terminals locations.• Communicates any problems, discrepancies or other noteworthy incidents to the CBM/PdM Supervisor without delay.• Read and check the data on the oil type and machine type for accuracy.• Conduct Oil Analysis for Fluid Properties, Contamination, Water Debris, and Wear Rate.• Verify elemental wear data and compare to reference and trended data. Use a wear debris atlas to match elements to their possible source.• Verify elemental contamination data along with particle counts and compare with reference and trended data. Use a wear debris atlas to match elements to their possible source.• Check moisture/water levels and compare to reference and trended data.• Verify the acid number and base number and compare to reference and trended data.• Check other analyzed data such as oxidation levels, flash point, demulsibility, analytical ferrography, etc.• Compare any groups of data that are trending toward unacceptable levels and make justifications based on these trends.• Setting standard alarm limits and make adjustments based on the new information.• Supports and participates in CBM/PdM programs and meetings• Interpret an oil analysis reports from commercial laboratories, for all APM Terminals, highlight any discrepancy and share it with all concerned parties.• Demonstrates a high level of integrity in all business dealings
We are looking for• Bachelor’s degree in Chemistry or Engineering is required.• 3 years extensive industry experience with oil testing methods, including ICP metals analysis, high temperature simulation, and other methods commonly used analysis of oil samples.• Able to deal with Fourier Transformation Infrared Spectroscopy FTIR instruments, Atomic Emission Spectroscopy (AES), and Particle counting instruments.• Knowledge of ISO 4406, or NAS 1638 standards.• Laboratory Information Management Systems experience, and Statistical Quality Control SQC experience in a laboratory is a plus.• Knowledge of Particle Quantifier PQ Index, and Oil Addictive (Anti-Wear, Anti-Rust, Anti- Oxidation, …etc).• Knowledge of Oil Testing methods (Part counts, Ferrography, Spectrum Oil Analysis Program SOAP, Inductively Coupled Plasma ICP, …etc).• Knowledge of Lubricating Oil Sensors, CBM/PdM, and IoT technology.• Knowledge of Weibull Analysis, and P-F curve is a plus.• Possess a strong commitment to personal and job safety.• Must possess basic computer skills and proficient in MS Office applications including spreadsheet and word processing.• Good verbal/written communication skills in English, decision making skills and a strong work ethic.• Must be accountable and self-driven to learn, and to continuously developPOSTULER